230V 170W الألومينا السيراميك بيليه الشاعل القابلية للتوصيل
Ceramic Pellet Igniter consist of Al2O3 insulation ceramics with an integrated W conductor, and reach a permanent operation temperature of between 900°C and 1100°C.
Model No.: FUH-H5-2
حجم الأنبوب: 78*Φ10.5*φ6.5mm
سيراميك: OD6.5*35 (أو حسب الطلب)
الجهد االكهربى: 230V Power: 170دبليو
دعم المقبس: رقم 4 / رقم 5 / رقم 6 / رقم 29
سلك الرصاص: 300مم / 400مم / 500مم / 900مم (قبول مخصص)
نطاق درجة الحرارة: 800~ 1100 درجة مئوية
قطب كهربائي: Welding leads on the electrode Pluggability
230V 170W الألومينا السيراميك بيليه الشاعل القابلية للتوصيل
Our special application area for the high-temperature heaters is in heating systems that use solid fuels such as wood pellets as the energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission value.This can only be achieved with a sufficiently high ignition temperature. Our short surface igniters are perfectly suited for this purpose. The special geometry of the cylindrical ceramic heaters, in combination with an extremely high surface temperature of 1000°C, heats up the supply air in the shortest possible time to an extremely high temperature. After a maximum of 90 ثواني, the fuel is ignited with a fraction of the energy that is required for a hot air of ignition blower. This works, of course, not only with pellets, but also with wood chips, الوقود الصلب مثل الكريات الخشبية كمصدر للطاقة, coal bricks or other solid fuels made of biomass.
Further product advantages:
1.Ready assembled, easy-to-install systems
2.Space-saving, noiseless and impervious to overheating (in case the blower fails)
3.Extremely long-lasting and resilient
4.Minimal energy consumption
5.Completely electrically insulated
6.No exposed electrical contacts
7.No sensitive welding points
لويزيانا بيليه جريل الشاعل
Ceramic Igniters For Solid Fuel Furnaces
Our special application area for the high-temperature heaters is in heating systems that use solid fuels such as wood pellets as the energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission value. This can only be achieved with a sufficiently high ignition temperature.Our short surface igniters are perfectly suited for this purpose.
Heats up
The special geometry of the cylindrical ceramic heaters, in combination with an extremely high surface temperature of 1000°C, heats up the supply air in the shortest possible time to an extremely high temperature. After a maximum of 90 ثواني,the fuel is ignited with a fraction of the energy that is required for a hot air of ignition blower. This works, of course, not only with pellets, but also with wood chips, الوقود الصلب مثل الكريات الخشبية كمصدر للطاقة, coal bricks or other solid fuels made of biomass.
Further product advantages:
1.Ready assembled, easy-to-install systems
2.Space-saving, noiseless and impervious to overheating (in case the blower fails)
3.Extremely long-lasting and resilient
4.Minimal energy consumption
5.Completely electrically insulated
6.No exposed electrical contacts
7.No sensitive welding points.
Quality Control System
Green Part’s Resistance Inspection
All Testing
Wire Pull
Power-on Test
Dielectric Strength Test
All Inspection
IrDA Test
Life Testing
As Customer’s request
230V 170W الألومينا السيراميك بيليه الشاعل القابلية للتوصيل
