300W Fireplace Heater

800C~1200C MCH Ceramic

Heating Element/120V/240V pelleT systerm igniters with the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

Characteristic

1.High temperature-resistance ceramic pellet igniter which can reach a permanent working tem-

perature above 750°C

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

5.Customization the igniters according to customers’ specific requirement.

Alumina ceramic heaters for pellet boilers need only approx. 1/10 of the energy of that

needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt.

Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 s

econds is extremely short. This also means minimal emissions!

Mass customization is available.

1	Part No.	FUGW012
2	Usage	Fireplace Heater
3	Working Voltage	230V
4	Power	150W
5	Dimension of product	Standard Dimension
6	Cable	Accordingly
7	Advantages	(1)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket (2)Air can flow through and around inside and outside of heater (3)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C (4)Long Lifetime , depending on operating conditions (5)Oxidation and corrosion-resistant (6)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower! (7)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible.

Contact Us