Стабилизированный MGO керамический стержень из диоксида циркония Psz

The specification of the ceramic rods
1. Material options: YSZ zirconia, TTZ zirconia, 95~99.5% alumina, Карбид кремния (SiC)
2. Метод формирования: Extruding, Сухой пресс, Керамическое литье под давлением, and ISO pressing
3. Спецификация: Available outer from 1mm to 50mm, available length from 3mm to 2000mm
4. Tolerance A: Diameter below 12.5mm, tolerance ± 3% or ± 0.076 мм, whichever is greater. Прямолинейность: camber / длина < 0.003
5. Tolerance B: Diameter above 12.5mm, tolerance ± 5% or ± 0.76 мм, whichever is greater. Прямолинейность: ≤ 0.006″/1.000″ cumulative
6. Чистота поверхности: the working surface to be diamond polished up to Ra0.1, или лучше
Основные особенности zirconia ceramic rods
1. Higher density than most technical ceramics, over than 6 г / см3
2. Низкая теплопроводность, меньше, чем 3 W/m.k at room temperature
3. Химическая инертность, not interact with almost all strong acid and alkali
4. Высокая твердость, над 1300 MPa for Vicker
5. Can withstand higher temperatures up to 2400°
6. Exceptional fracture toughness reaches up to 8 МПа м1/2
7. Resistance to molten metals due to an extraordinary melting point
8. Хорошая износостойкость, над 276 раз, чем из нержавеющей стали

Стабилизированный MGO керамический стержень из диоксида циркония Psz

The description of zirconia ceramic rods
Диоксид циркония (ZrO2) is an exceptional heat resistant material. They exhibit excellent chemical inertness and chemistry resistance at high temperatures up to 2200ºC, well above the melting point of alumina. Zirconia is stabilized in the cubic crystal structure to avoid cracking and mechanical weakening during heating and cooling. It’s always an ideal option for high pressure, easily breakage application.

Zirconia ceramic rods/bars have the advantages of super hardness, high wear-resisting, high-temperature tolerance, хорошая коррозионная стойкость, very low friction coefficient, высокая прочность, высокая механическая прочность, good chemical stability, polishing surface, и так далее. All these ceramic components can offer high dimensional accuracy, mirror surface, and stringent straightness via fine grinding and diamond polishing.

We have been supplying with many selections of regular diameters with custom lengths, also we are capable of producing various special shapes, customized diameters in specific materials.